Konica Minolta 7020 - Manual (Page 28)

28
7.5.2 Copy Density
– For a lighter or a darker copy, press the corresponding arrow
key.
– Pressing AUTO activates the automatic exposure.
– The key operator can program two individual density settings
under the USER settings.
– The key operator can individually adjust the scale for the 9
lighter to darker density settings.
7. Simple Copying
7.5.3 Magnification: Reduce & Enlarge / Zoom / Vertical/Horizontal Zoom
You have several different options to adjust the magnification
ratio:
– Pressing the 1.00 key in this screen, will produce size to size
copies. This deactivates AMS (Automatic Magnification
Selection). To reactivate press –A–.
– Exact magnification ratios (e.g. A3 to A4) are preset. Press RE
to display the pop-up menu shown on the left and select the
desired magnification.
– The three X keys provide individual magnification ratios and
can be programmed by the key operator.
– For individual adjustments, press the ZOOM key, and the
display on the left will be called up. Use the arrows to set the
required magnification ratio; or enter the value via the keypad.
You can select a ratio from 0.25 to 4.00 (25% to 400%).
Confirm your selection by pressing OK.
– For individual adjustment of the vertical and the horizontal
magnification ratio do the same but select an individual value
for each direction. Enter the values for both directions via the
keypad, and press OK to confirm.
This screen appears after pressing “Zoom“.
You can adjust the zoom ratio with the
arrow keys or by entering a value via the
keypad.