Konica Minolta 7020 - Manual (Page 41)

41
9. Special Functions
This function serves to combine originals which are processed via
the RADF
* with pages, which cannot be fed through the RADF *
(e.g. photos, pasted or thick originals). These images are scanned
from the platen glass and are automatically positioned after the
specified pages in the copied set. A total of 15 inserts with page
numbers up to 999 is possible.
9.2.4 Image Insert
8
1
7
6
5 4
3 2
8
7
6
1
5
4 3
2
Originals Inserts
Copies
– Select the function; and use the keypad to enter the page
numbers, after which the images are to be inserted. If several
inserts should follow after the same page number, enter that
figure as many times, i.e. once for every insert.
– Confirm each page number by pressing SET. The last number
entered can be cancelled at any time by pressing DELETE.
– After entering all required page numbers, confirm by pressing
OK, until you have returned to the Basic screen. If you want to
combine this function with Booklet, you have to activate this
function here; it can no longer be selected afterwards.
– Select other functions as required, and set the number of
copies.
– First, position the original set in the RADF * , and press SCAN.
– The unit now prompts you to scan the inserts via the platen
glass, one after the other in the order, in which they are to be
inserted into the copied set.
– Press START to start copying. The specified quantity of copied
sets is now automatically produced from memory.
Images are inserted after the specified
pages, in this example after pages 2 and 4.