Konica Minolta 7020 - Manual (Page 42)

42
9.2.5 Combination
9.2.6 Dual Page / Book Copy
Use this function to automatically copy the left and right page of
an open book onto two separate A4 sheets or the front and
back of one A4 sheet. The front and back cover can be included,
and the booklet mode also selected.
– Press the function key. This automatically activates also Auto
Layout, Non Image Area Erase and the Store Mode.
– Select the required output option and one of the three book
copy modes. Confirm by pressing OK, until you have returned
to the Basic screen.
– Position the book on the platen glass; the RADF * has to
remain open. Follow the user instructions in the display and
start by scanning the front and back cover of the book.
– Scan the required pages of the book in reading order.
– Make further selections, e.g. 1 3 2, if the pages of the book
are to be copied on the front and back of A4 sheets.
– Press START to start copying.
This function lets you combine two, four or eight original images
on one page.
– Press the key for the required combination: 2-in-1, 4-in-1 or
8-in-1. With the selections under LAYOUT, you specify the
page order: from top to bottom, or from left to right.
– If you want to place up to 16 originals on the front and back
of a single sheet, select 1
3 2 or 2 3 2 (for double-sided
originals); now make other required settings.
– A4 copy size is automatically selected; but you can specify
another size if required.
– Position originals in the RADF * . If you want to position your
originals on the platen glass, select the Store Mode and scan
each original by pressing the SCAN key.
– When all originals have been scanned, start copying by
pressing START.
9. Special Functions
* Option