Kathrein UFD 570/S - Manual (Page 21)

Channel Selection
21
Channel Selection
This section describes how you select TV channels with your receiver
and how you can set the required volume.
This description of the functions assumes that the receiver has been
connected correctly.
If you wish to connect the receiver yourself, please read the section
"Connection and start-up" beforehand.
Selecting a TV channel
Reception status
The following information describes how to select other channels and
shows what the on-screen displays look like.
After switching on the receiver, simply press the

buttons in
order to select other TV channels in their ascending or descending
order in the channel memory.
Every time you press the button, an on-screen display shows you the
selected channel together with the time, the programme start and end
times as well as the channel title in the information box provided this
data is transmitted together with the signal.
By pressing the

button, you can leave this information box
permanently displayed or switch it off by pressing the button once
again.
You will receive the "Channel scrambled" message for scrambled
channels.
You cannot receive these channels with the receiver UFD 570.
A further option for selecting a different channel is to press the

button. The TV channel list is now displayed. In the top right
column it provides information on the network, channel, carrier
number and the broadcaster. The left column shows the channel
location, channel name, type of received signal (free to air/scrambled)
as well as the favourites and locked channels.