Kathrein UFD 570/S - Manual (Page 36)

Channel Overview
36
Here you can enter the details of the new channel.
The first line in the list is highlighted by a coloured bar.
Press the

buttons to move the bar vertically to the required
position.
Press the

buttons or the number buttons to edit the relevant
position, i.e. to make the necessary entries.
It is possible to set
• the received network,
• the channel,
• the channel name.
Only alphanumeric and decimal entries are accepted at the positions
• Video PID (program identification)
• Audio PID and
• PCR PID (PCR = program clock reference)
Access the channel list again by pressing

. Confirmation is given
that your changes have been saved and the information display of the
channel currently received appears for several seconds on the screen.
The new channel is added to the end of the existing channel list.
You can obtain the necessary PIDs from relevant TV and satellite
magazines and the Internet. Refer to section "Notes on operation" for
information on how to make alphanumeric entries.
Never change the PIDs without good reason as they affect the
identification of the reception signal.
This function is only required for channels that are not broadcast
in accordance with the DVB-T standard. All standard channels
are detected and stored by the automatic scan.