Kathrein UFD 570/S - Manual (Page 8)

Controls, Indicators, Displays and Connections
8
Controls, Indicators, Displays and Connections
In this section you will find a short description of all controls,
indicators, displays and connections. The button symbols used here
are also used in the description of the operating steps.
Front view
(Panel folded down)
Rear view
Controls, indicators and displays on the
front panel Controls and connections at the rear
1 ON/OFF switch (with mains disconnection)
2 Channel down
3 Channel up
4 LEDs (red = standby, green = confirmation
of remote control commands)
Green = Operation
Green flashing = Confirmation of remote
control commands
1 Antenna input
2 DATA socket
Interface for serial data transmission
(service)
3 Antenna output (looped through)
4 SCART socket / TV connection
5 Input for infrared receiver
6 Audio outputs
2 Cinch jacks, left and right channel
7 AC3 output (digital Dolby audio)
8 FBAS video output
9 Direct voltage input 12 V
1 2 3 4
1 2 3 4 5 6 7 8 9