Kathrein UFD 570/S - Manual (Page 49)

Installation
49
Pay attention to the help
information on the
individual menu items
you can obtain by
pressing the

button!
Manual search
The manual search is recommended when you already know the
channel data, frequency or channel number. Use the

buttons to select one of the two settings you can change step-by-step
until you receive a signal. The bar on the left indicates when a signal
is received.
Figure above: Correct network, wrong channel, wrong frequency
Figure below: Correct network, right channel, right frequency, signal
indicator "good"
You must enter the network, channel and frequency otherwise
the manual search will not be adopted!
Channel entry: Select the respective channel using the

buttons or
the number buttons. For this purpose, press

and enter the
required channel number. After pressing

again, the channel is
changed to the corresponding frequency.
Frequency entry: This function is intended for service purposes only
and permits manual entry of the channel frequency.