Kathrein UFD 570/S - Manual (Page 22)

Channel Selection
22
By pressing the

buttons you jump to the next channel and
by pressing the

buttons you jump to the neighbouring page.
Confirm your selection by pressing the

button.
You can also use the number buttons to select the required channel.
Press the

button to exit the channel list and remain in the channel
already set.
Selecting a TV channel by number entry
You can select a different TV channel during a current TV channel by
entering the channel location number. Use the number buttons

to

for the purpose of entering the channel location number.
Example: You wish to select the TV channel "DSF". This channel is stored under
the channel location number 015. (The order of TV channels is
defined in the channel memory and therefore only serves as an
example here.)
To select this channel, press the numbers

and

one after the
other. The receiver waits for about 3 seconds for entry of the next
number.
Follow the same procedure for all other channels – i.e. also channels
with three-digit channel location numbers. Do not enter leading zeros
otherwise teletext (if provided) will be selected.