Kathrein UFD 570/S - Manual (Page 23)

Channel Selection
23
Switching over to radio channel
You can switch over from a TV channel to a radio channel.
Press the

button on the remote control for this purpose.
The receiver switches over to the channel location of the radio
channels last set. You can return to the TV channel by pressing the
same button or

. The corresponding display relating to the
received channel, i.e. as when selecting the TV channels, appears on
the screen. The LCD display shows a small "r" together with the
channel location number.
The screen will be blanked out after several seconds.
Reception status - radio
After switching over the receiver, simply press the

buttons
to select other radio channels in their ascending or descending order
in the channel memory.
Every time you press the button, an on-screen display shows you the
selected channel together with the time, the programme start and end
times as well as the channel title in the information banner provided
this data is transmitted together with the signal.
By pressing the

button, you can leave this information bar
permanently displayed or switch it off by pressing the button once
again.
A further option of selecting a different channel is to press the

button. The radio channel list is now displayed. In the top right