Kenwood DV-5700 - Manual (Page 23)

Basic Operation
23
Chapter 3: Basic Operation
Still picture display and playback
pause
Press 8 during playback.
¶ If you are operating the joystick remote, set the
mode switch to the Blue position and press the 8
button.
¶ The TV screen shows "Pause" or "Still" and the 8
indicator in the display lights up.
¶ To restart normal playback, press the 3 button on
the player main unit or the 3 PLAY button on the
joystick remote.
¶ When the "IPB Display" is set to On, the TV screen
shows "Still (I)", "Still (P)" or "Still (B)" with
every still picture of DVD VIDEO.
¶ This operation is not available with a MP3 disc.
Frame-by-frame advance
While a still picture of DVD VIDEO or VCD is dis-
played, press
8 .
¶ If you are operating the joystick remote, set the
mode switch to the Blue position and press the 8
button.
¶ The picture returns to still picture when the 8
button is released.
¶ The picture frame is advanced for the same number
of times as the button is pressed. Hold the button
when you want to advance picture frames
sequentially.
¶ To restart normal playback, press the 3 button on
the player main unit or the 3 PLAY button on the
joystick remote.
¶ When the "IPB Display" is set to On, the TV screen
shows "Still (I)", "Still (P)" or "Still (B)" every
time the picture frame of DVD is advanced.
Forward search and reverse search
During playback, set the mode switch of the joystick
remote to the Blue position and press
1
REPEAT
0 or
¡
CHECK
C .
¶ When OSD is displayed, pressing the ON SCREEN
button turns it off and shows the speed in place.
¶ The first press of the 1 or ¡ button starts
forward search or reverse search at the lowest speed
step. Each further press increase the speed up to
the fifth speed step.
The TV screen shows the speed as shown above.
The indicator varies according to the speed of the
forward search or reverse search.
¶ The display of the player shows the time display or
"SEARCH =" according to the status of the disc
and player.
"SEARCH
=" is displayed :
When the time infomation is not displayed
during DVD playback.
When P.B.C. is on during VCD playback.
¶ To restart normal playback, press the 3 button on
the player main unit or the 3 PLAY button on the
joystick remote.
¶ Video may be disturbed during forward search or
reverse search.
¶ When performing forward search with a VCD, DVD
VIDEO or DVD AUDIO containing video and
moving pictures (AVTT: Audio Video Title), the
audio output can be switched on or off only while
the search is at the lowest speed step. The audio is
muted in the second and later speed steps.
¶ This operation is not available with a MP3 disc.
Slow playback and reverse slow
playback
While a still picture is displayed, set the mode switch
of the joystick remote to the Blue position and press
1
REPEAT
0 or
¡
CHECK
C .
¶ When OSD is displayed, pressing the ON SCREEN
button turns it off and shows the speed in place.
¶ The first press of the1 or ¡ button starts slow
playback or reverse slow playback at the lowest
speed step. Each further press increase the speed
up to the fifth speed step.
The TV screen shows the speed as shown above.
The indicator varies according to the speed of the
slow playback or reverse slow playback.
¶ The display of the player shows the time display
or "SEARCH =" according to the status of the disc
and player.
"SEARCH
=" is displayed :
When the time infomation is not displayed
during DVD playback.
When P.B.C. is on during VCD playback.
¶ To restart normal playback, press the 3 button on
the player main unit or the 3 PLAY button on the
joystick remote.
¶ Audio is not output during slow playback or reverse
slow playback.
¶ Reverse slow playback is not available with VCD.
¶ Slow playback and reverse slow playback are not
available with CD(MP3) or DVD AUDIO
containing only still pictures and audio (AOTT:
Audio Only Title).