Kyocera KM-3650w - Manual (Page 29)

Chapter 2 Basic Operations 2-12
7. Rotate the body (4) of the cartridge to the arrow
direction some revolutions to open the toner
supplying hole.
(You may feel tight when rotating the body (4).)
8. Close the Toner Hatch (Original Table) (1) finally.
NOTE
(1) Confirm that the projection (8) is fitted into
the notch (9).
(2) The Lever (2) may not lock the cartridge at
this point of time, as it rotates and locks the
cartridge automatically when Toner Hatch
(Original Table) is closed.
8
9
1
2
4
4