Kyocera KM-3650w - Manual (Page 43)

Chapter 3 Error Correction 3-10
4. If the paper is not accessible from the front side, hold both handles (2) and open the Exit
Cover (3).
5. Remove the paper pulling to the rear side.
2
WARNING
Do not touch any part in the Exit Cover because some parts are extremely hot, or you will be
burnt.
Also be careful not to get burnt when you touch the printing paper as it may be very hot.
NOTE
Toner may be sticking on the Fuser Roller after removing the mis-fed paper.
This toner may be fused onto the next printing paper.
3