Kyocera KM-3650w - Manual (Page 31)

Chapter 2 Basic Operations 2-14
2. 6 Copying
1. Move the position of the Original Guides (1)
according to the width of original.
2. Put the original on the Original Table with face up.
Insert it under the Scanner Unit along with the original Guides.
When the leading edge touches the original feeding roller, the machine automatically carries
the original to scan its image.
Scan starts automatically.
1
NOTE
(1) You need to press the Start Key on the
Operation Panel to start copying if the Auto
Start is OFF.
Start Key
(2) It the original is curled “up”, stretch the original well to make it be out of curl before setting
to the scanner.