Kenwood DNX SERIES DDX6046BT - Manual (Page 13)

English 13 DDX SERIES DDX616/DDX6046BT/DDX516
Getting Started
How to Set a Medium / a Device
7 Disc media
If a disc is already inserted, it is ejected by
pressing the [
0] button.
7 iPod
To disconnect the iPod, stop the playback
by touching the [
38] button on the source
control screen, and then disconnect the iPod.
See <Source Control Screen> (page 30).
7 USB device
To disconnect the USB device, touch the [ 0]
button on the source control screen, and
then disconnect the USB device. See <Source
Control Screen> (page 23).
⁄
• The playback starts automatically after setting the media
or the device.
DNX series DNX series
7 microSD card
This microSD card slot is used to upgrade the
Navigation System.
For how to upgrade the Navigation System,
refer to the instruction manual of the
navigation system.
Inserting the microSD card
Hold the microSD card with the label side
facing left and the notched section up, and
insert it into the slot until it clicks.
Removing the microSD card
Push the microSD card until it clicks and
then remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.