Kenwood DNX SERIES DDX6046BT - Manual (Page 52)

52 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160
7 If there are more than one phone numbers
assigned under the registered name
Say the key word registered for the 5
category
When a beep is heard, say the key word within
2 seconds.
Make a call 6
7 If there are more than one phone numbers
registered under the same name, go to step 7.
Select a Phone number category 7
Selects the Phone number category.
Make a call 8
⁄
A message is displayed if the voice is not recognized. •
Read the message for the further operation.
Controlling Tone-based Services
Uses tone base service using DTMF (Dual Tone
Multi Frequency).
Display the Talking screen 1
See <Calling by Entering a Phone Number>
(page 50).
Display the DTMF input screen 2
You can send tones during a call 3
Hands-Free Phoning