Kenwood DNX SERIES DDX6046BT - Manual (Page 68)

68 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160
Load the image 6
1 1 1
1 Rotates the image.
⁄
See • <About Picture files> (page 6) for readable image
specifications.
The [Memory] button on the “Background” screen
•
becomes active only in STANDBY source mode.
Pressing the [Memory] button on the “Background”
•
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to <AV Interface
Setup> section.
While loading the Background image, any other
•
operation is prohibited.
Background Change
Selects a image for background.
Select Background Change screen 1
Select a image for background 2
1 1 1
1 Returns to the initial background.
Set the image as the background 3
Panel Color Coordinate
Sets the button illumination color.
Display the Color screen 1
Touch [ ] > [ ] > [Display] > [Color].
(page 62)
Display the Panel Color Coordinate screen 2
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the buttons changes one
after another.
⁄
When touching [SET] or [Initialize], make sure [Panel •
Color Scan] is set to "OFF".
Select a color 3
1 1 1
1 Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P1] – [P3]).
Setup Menu