Kenwood DNX SERIES DDX6046BT - Manual (Page 55)

English 55 DDX SERIES DDX616/DDX6046BT/DDX516
Key Word Voice Registration
Registers the voice to select the Phone number
category by Voice Recognition.
Display the Hands Free Setup screen 1
See <Setting Up the Hands-Free Phone> (page
53).
Display the Key Word List screen 2
Select the Phone number category to 3
register
1 1 1
1 Selects the Phone number category.
"REC" turns on for data with voice for voice
recognition already registered.
[Record] Registers voice for the selected
Phone number category.
[Play] Plays the voice registered for the
selected Phone number category.
[Delete] Deletes the voice registered for the
selected Phone number category.
Touch to display the confirmation screen.
Touch [Yes] to delete or [No] to cancel.
⁄
[Play], [Delete] •
Only for DNX5160 and DDX516 with optional
Bluetooth unit KCA-BT200 connected.
Display voice registration screen 4
Say the phone category to register (1st try) 5
Say within 2 seconds after the Beep.
Say the phone category to register (2nd try) 6
Say within 2 seconds after the Beep.
End voice registration 7
⁄
A message is displayed if the voice is not recognized. •
Read the message for the further operation.
Repeat from 1st try if the voice is different from the 1st
•
try.