Kenwood DNX SERIES DDX6046BT - Manual (Page 76)

76 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160
DVD Setup
You can set up the DVD play.
Display the DVD Setup screen 1
Touch [ ] > [ ] > [DVD SETUP]. (page 62)
Set each item 2
[Menu Language]* Selects a disc menu
language.
(See <DVD Language Setup>, page 77)
[Subtitle Language]* Selects a subtitle
language.
(See <DVD Language Setup>, page 77)
[Audio Language]* Selects an audio
language.
(See <DVD Language Setup>, page 77)
[Dynamic Range Control]* Sets the dynamic
range. ( "Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
( "ON")
[Screen Ratio]* Selects the screen display
mode. ( "16:9")
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at the
top and bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
[Parental Level]* Displays the Parental Lock
screen. ( "OFF")
(See <DVD Parental Level Setup>, page 77)
[Disc SETUP] Makes the settings related to the
disc media. (See <Disc Setup>, page 78)
⁄
* Disabled when a DVD is being played. •
Setup Menu