Kenwood DNX SERIES DDX6046BT - Manual (Page 40)

40 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160
HD Radio™ Control
Multi Function
[1/2] Switches the multi function display.
[
] Closes the multi function bar.
[ ] Opens the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 41) or <Manual
Memory> (page 41).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 41).
[DIR]* You can tune in by entering the desired
frequency or channel number. See <Direct
Search> (page 42).
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[TTL] Displays the tuned in program
information.
[RCV] The Receive mode switches in the
following order. (page 42)
⁄
* KTC-HR300 (optional accessory) connected only. •
Various control screens appear in the HD Radio Source mode. (only with the optional accessory HD Radio
tuner connected)
Source Control Screen
Switches to the source control screen to use
various functions.
Display the Source 1 Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control Screen 2
1 1 1
[HD FM] Switches to the HD FM1/2/3 band.
[HD AM] Switches to the HD AM band.
[
4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
[CH ∞], [CH 5] Selects a channel (program).
1 Information display
Displays the information of the currently
listening station.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
"HD" Channel display
"Tag"* When song information can be
registered. (page 43)
[ ] When appears, the text display is
scrolled by touching it.