Kenwood DNX SERIES DDX6046BT - Manual (Page 80)

80 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160
SIRIUS Parental Code Setup
Sets a SIRIUS Parental code.
Display the SIRIUS Setup screen 1
Touch [ ] > [ ] > [SIRIUS SETUP]. (page
62)
Display the Parental Code screen 2
⁄
If you have already completed the code registration, •
[Change] is displayed.
If you want to clear the code which has already been
•
registered, touch [Clear].
Pressing [Clear] for 5 seconds or longer deletes the
•
code.
Enter the current code number 3
1 1 1
1 Enters a code number.
[Cancel] Cancels the current setup and returns
to the SIRIUS Setup screen.
[Enter] Registers the enetered code number
and displays the Parental Code 1st screen.
[Clear] Clears the code number.
⁄
If you are to register the parental code for the first •
time, this screen will not appear. Go to Step 4.
Enter the new code number 4
Confirm the code number 5
Enter the same code number as you input in
step 4.
SIRIUS Parental code is now set, and the display
returns to SIRIUS Setup screen.
Setup Menu