Kyocera FS1750 - Manual (Page 11)

Introduction
x
Prolonged Non-Use and Moving the Printer
Prolonged Non-use
If you ever leave the printer unused for a long period of time, remove the power cord from the wall outlet.
We recommend you consult with your dealer about the additional actions you should take to avoid possible
damages that may occur when the printer is used next time.
Moving the Printer
When you move the printer:
❒ Move it gently.
❒ Keep it as level as possible, to avoid spilling toner inside the printer.
❒ If you need to move the printer to another location, first remove the toner container, developer unit, and
waste toner bottle. After removing the developer unit from the printer, wrap it in the supplied plastic bag
and place it into the box in which the toner container is packaged. Make sure that the waste toner bottle
is securely capped and place it in the plastic bag together with the toner container. Be sure to consult a
serviceman before attempting long-distance transportation of the printer.
(1)
Remove the developer unit.
(2)
Close the protect cover.
(3)
Pack the developer unit.
To reinstall the developer unit in the printer, use the reverse procedure of the above.
Protect cover
Toner container box
Plastic
bag
(supplied)
1. Disconnect
2. Push
Developer unit