Kyocera FS1750 - Manual (Page 65)

2.8. Setting the Paper Type
2-20
Making Settings
The following describes the procedure for setting the paper type using the Recycled type and Cassette as
examples.
1. Display
ý3DSHUýKDQGOLQJý! on the printer's Mode Select Menu and press the key. Then use the
+ and – keys to display theý&DVVHWWHýW\SH.
2. Pressing the ENTER key will cause aý" to flash. Press the + and – keys to displayý5HF\FOHG.
Press the CANCEL key if you want to cancel the setting. Theý" display will disappear.
3. Pressing the ENTER key will cause theý" to disappear. Pressing the EXIT key will exit the setting.
The same procedure can be used to set the paper type for other paper sources.
Paper Type User Setting
The following describes the procedure used to set a user-defined paper type for the printer. Eight custom
user settings may be registered. After having been set, any of these may be called up when setting the paper
type for a paper source.
1. Display
ý3DSHUýKDQGOLQJý! on the printer's Mode Select Menu and press the key. Then use the
+ and – keys to displayý!7\SHýDGMXVW.
2. Pressing the ENTER key will cause aý" to be displayed. Press the + and – keys to select the paper type
(see page 2-19) that you want to customize and then press the ENTER key.
☛ Note that if you change the setting for a paper type other than ý&XVWRPýì throughýå the paper
type setting for each paper source set to that paper type will be changed.
3DSHUý KDQGOLQJý ! !&DVVHWWHý W\SH
э э 3ODLQ
!&DVVHWWHý W\SH
"ý 5HF\FOHG
3DSHUý KDQGOLQJý ! !7\SHý DGMXVWý э э !
э э &XVWRPý ú
!7\SHý DGMXVW
"ý &XVWRPý ъ