Kyocera FS1750 - Manual (Page 73)

2.15. Setting the Audio Warning (Buzzer)
2-28
The alarm will continue to sound while the error condition continues (if the printer is in the sleep mode, the
alarm will be silent for that period alone). The alarm will cease to sound, however, when the
CANCEL key is
pressed.
To rectify the various error conditions listed above, please refer to Chapter 5 of this manual, or to the oper-
ating manuals accompanying the various optional equipment.
☛ ‹ If you wish to cancel the data being processed while the audio alarm is sounding, press the CAN-
CEL key twice. Firstly, the audio alarm will be turned OFF, and then the data processing will be
canceled.
‹ After the audio alarm has been set to OFF, even if the PRESCRIBE 2e FRPO INIT command is exe-
cuted, the printer will not return to the initial (ON) alarm setting. To set the audio alarm to ON,
reset using the mode selector menu from the control panel.