KORG Professional Engineer PA3 - Manual (Page 43)

41 Pad Record mode
Pad Edit: Transpose
Advanced
Pad Edit: Transpose
In this page you can transpose the selected track(s).
Note: After transposing, please don’t forget to readjust the “Key/
Chord” parameter in the main page of the Pad Record mode (see
page 37).
After setting the various parameters, touch Execute.
CV (Chord Variation)
Use this parameter to select the Chord Variation for editing.
Value
Transpose value (±127 semitones).
Start / End Tick
Use these parameters to set the starting and ending points of the
range to be transposed.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to be transposed.
Execute
Touch this button to execute the operation set in this page.
Pad Edit: Velocity
In this page you can change the velocity (dynamics) value of
notes in the selected track.
After setting the various parameters, touch Execute.
CV (Chord Variation)
Use this parameter to select the Chord Variation for editing.
Value
Velocity change value (±127).
Intensity
(Only available in Advanced mode). Use this parameter to specify
the degree to which the velocity data will be adjusted toward the
curve you specify in “Curve”.
Curve
(Only available in Advanced mode). Use this parameter to select
from six types of curve, and specify how the velocity will change
over time.
Start / End Vel. Value
(Only available in Advanced mode). Velocity change at the start-
ing and ending ticks of the selected range.
Start / End Tick
Use these parameters to set the starting and ending points of the
range to be modified.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to be modified.
Advanced
When this checkbox is checked, the “Intensity”, “Curve”, “Start
Velocity Value” and “End Velocity Value” parameters can be
edited.
Execute
Touch this button to execute the operation set in this page.