KORG Professional Engineer PA3 - Manual (Page 77)

75 Sound operating mode
Page menu
Advanced
Page menu
Touch the page menu icon to open the menu. Touch a command
to select it. Touch anywhere in the display to close the menu
without selecting a command.
Write Sound
Select this command to open the Write Sound dialog box, and
save all editing parameters to a Sound.
See “Write Sound dialog box” on page 75 for more information.
Solo Oscillator
Select this command to solo the selected oscillator, and mute the
other oscillators. Select it again to unmute the other oscillators.
When this function is activated, the “Solo OSC [n]” indicator (n
= oscillator number) blinks on the page header. While in this sit-
uation, you can select a different oscillator to be soloed.
Swap LFO
Select this command to replace LFO1 with LFO2, and vice-versa.
Copy Oscillator
Select this command to copy all settings between oscillators. See
“Copy Oscillator dialog box” on page 76 for more information.
Copy/Paste FX
You can copy a single effect, or all effects. You can copy them
between different Sounds. The copy operation can only be car-
ried on while remaining in Sound mode (you cannot copy the
effects, for example, to a Song).
Note: This operation does not copy the “Send to Master”, “Dry On/
Off ” and “DrumFamily” parameters.
To copy a single effect:
1. Select the source Sound, then
• go to the page of the single effect you want to copy (IFX 1,
Master 1, Master 2, Master 3), or
• go to the Effects > B FX Config page, to copy all effects.
This may be useful if you want to copy more than a single
effect.
2. Choose the “Copy FX” command from the page menu.
3. Select the target Sound, then go to the page of the single
effect you want to paste (IFX 1, Master 1, Master 2, Master
3).
4. Choose the “Paste FX” command from the page menu.
To copy all effects:
1. Select the source Sound, then go to the Effects > B FX Con-
fig page, to copy all the effects.
2. Choose the “Copy FX” command from the page menu.
3. Select the target Sound, then go to the page of the Effects >
B FX Config page.
4. Choose the “Paste FX” command from the page menu.
Copy Drum Kit
Select this command to copy the Drum Kit from a different
Drum Kit. See “Copy Drum Kit dialog box” on page 76 for more
information.
Init Sound
Select this command to delete all parameters, and set them to a
default value.
Compare
When this command is checked, original Sound parameter val-
ues are temporarily recalled, to compare them with edited
parameters. You cannot edit the Sound while you are in Com-
pare mode.
While this function is on, the Compare indicator blinks on the
page header.
Write Sound dialog box
Open this window by selecting the Write Sound item from the
page menu. Here, you can save all Sound parameters to a Sound
location in memory.
Warning: If you write over an existing Sound, the Sound will be
deleted and replaced by the one you are saving (“overwrite”).
Please save on a storage device any User Sound you don’t want to
lose.
Note: DrumKits cannot be written over standard Sounds, nor vice
versa.
Note: To save over a Factory Sound location, unckeck the Factory
Sound Protect parameter in Media mode (see “Factory Sound Pro-
tect” on page 236 of the User’s Manual).
Warning: When replacing a Factory Sound, please be warned
that all Performance, STSs, Styles and Songs making use of it
will be modified as well. Use this feature with great care!
To restore the original data, please use the “Factory Restore” com-
mand in the Utility page of the Media mode (see page 235 of the
User’s Manual for more information).