Starting the presentation, English – Kodak V600 User Manual
Page 11
Starting the Presentation
7
English
Starting the Presentation
We recommend turning on the projector and image sources in the
order listed here.
Note: You might not be using all of these components for your
presentation.
•
Video source such as VCR, DVD or digital camera.
•
Audio source if different from your video source or
computer
•
Projector
•
Computer
1.
Connect the signal cable to the computer or video source.
2.
Connect the power cord to the projector and to a power source.
The Power light begins to blink.
3.
Turn on the presentation components in the order listed.
To turn on the projector, remove the lens cap and press the Power
button on either the remote control or the keypad.
The Power light stays a steady green when the lamp comes
on.
Either the title screen or the image from the image source
appears.
Note: Many laptop computers do not automatically turn on their
external video port when another display device is
connected. Refer to your computer’s user guide for the
function key or command that activates the port. MAC
users may need to turn on SimulSCAN or monitor
mirroring. Refer to the computer manual.
POWER
MENU
ADJUST
ENTER
NEXT
Power
Menu
Enter
Next
Adjust
Volume
power button
V600UserGuide.book Page 7 Tuesday, March 21, 2000 8:26 AM