Kodak V600 - Manual (Page 32)

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector
28
Sound
Remote Control
Problem Cause and Solution
No sound. • Adjust volume.
• Verify audio / input connections.
• Adjust audio source.
Poor sound quality. • Make sure you are connected to the
earphone jack on your laptop or line out
jack on your desktop.
• Make sure the volume setting on your
computer is halfway.
No audio-out port on the
image source. You are not able to connect audio to the
projector.
Problem Cause and Solution
Projector responds poorly
or not at all to the remote
control. • Make sure that the total distance from
the remote to the projector is no more
than 32 feet (10 m).
• Point the remote control at the screen or
at the front of the projector.
• Make sure nothing is blocking the
infrared sensor on the front of the
projector.
• Darken the room. The lighting might be
effecting the remote control.
• Replace the remote control batteries.
V600UserGuide.book Page 28 Tuesday, March 21, 2000 8:26 AM