Kodak V600 - Manual (Page 29)

Troubleshooting
25
English
Image Quality
Problem Solution
Color or text is not being
projected. Adjust the brightness up or down until
the text is visible.
Some text or fonts are not
sharp with a computer as an
image source. For optimal results, set the computer’s
resolution to 800 x 600. (Refer to your
computer user manual.) But this projector
can compress resolutions up to
1024 x 768.
Image isn't centered on the
screen. • Be sure that the projector is at a 90°
angle to the screen.
• Reposition the image. See “Setting Up
the Image Source” on page 14.
Image is out of focus. • Turn the projection lens to focus the
image.
• Make sure that the projection screen is
at least 3 ft (.9 m) from the projector.
• Check the projection lens to see if it
needs cleaning.
Image and menus are upside
down. • If projecting from a ceiling mount,
make sure that Ceiling Projection is
selected on the Setup tab in the Menu.
• If projecting from an upright position,
make sure that Front or Rear projection
is selected on the Setup tab in the
Menu.
Image and menus are
reversed from left to right. • If projecting from behind a screen
make sure that Rear Projection is
selected on the Setup tab in the Menu.
• If projecting in front of a screen, make
sure that Front or Ceiling Projection is
selected on the Setup tab in the Menu.
V600UserGuide.book Page 25 Tuesday, March 21, 2000 8:26 AM