Kathrein UFS 702sw - Manual (Page 2)

2
Preface
Dear customer,
This operating manual is intended to help you make the
fullest use of the extensive range of functions offered by
your new satellite receiver.
We have tried to make the operating instructions as easy
as possible to understand, and to keep them as concise as
possible. To help you understand particular specialist terms
that cannot be translated, we have added a short glossary
at the end of the manual.
The power switch is an environmentally friendly feature.
If you will not be using your receiver for a longer period, you
should use the power switch to disconnect it from the power
supply and save energy. For shorter breaks, you can switch
the receiver to standby on the remote control, which uses
only a minimal amount of energy.
We wish you good reception and much pleasure using your
new DVB satellite receiver.
Yours,
The KATHREIN team
Important Information
The channels available on the satellites and transponders
are subject to continual change. If changes do occur, the
new channels have to be set in the receiver because the
factory preset programming corresponds to the status on
the date of manufacture. The information for these settings
can be found on the Internet or in relevant magazines.
Your receiver is factory fi tted with the latest software
version. We are, however, constantly working on adapting
the software to the wishes of our customers and to
developments in technology. The “Software and Channel
List Update” section contains additional information.
Please keep the original packaging in case you need
to return the product at any time!
Make a note of the receiver’s basic settings, so as to
be able to restore them if necessary!
DiSEqC™ is a trademark of Eutelsat.
UFO®micro and UFO®mini are registered trademarks of
KATHREIN-Werke KG.