Kathrein UFS 702sw - Manual (Page 34)

34
If the parameters (satellite, frequency, polarisation, symbol
rate) of the channel being searched for are known, the
transponder search can be used.
If, for example, a new channel launches within a known
channel group, a channel from that group can be preset by
selecting the channel. The necessary parameters are then
imported in the transponder search.
If “No signal!” is displayed on the “START” line, reception
is not possible. Check the “Satellite”, “Frequency”,
“Polarisation” and “Symbol rate” parameters again. The
search can only be started if “Signal!” is displayed.
• Start the search by pressing the
button
Encrypted channels are indicated by “$”. Channels that
you do not want to import can be deleted individually with
the
# button (blue).
New channels are indicated by “+”. Import the channels into
the pool by pressing the
button.
Manual input (for experts )
Path: MENU>Main menu>Search>Manual
If neither the satellite search nor the transponder search
fi nds the channel you are looking for, you can enter all the
relevant reception parameters in the “Manual input” function.
Manual input is very useful, for example, if you know the
reception data of the channel you are looking for, but the
channel does not broadcast all the time.
Search
The newly found pro-
grammes are also stored
in the programme list,
which is called up by pres-
sing twice. However,
unlike in programme pool,
these are not attached
to the end of the list, but
rather to the end of each
available broadcasting sa-
tellite programme. Here,
the “~~~~~” placeholders
available in the programme
list are overwritten by the
new programmes. For
“ASTRA 19° East“ satel-
lite programmes, the pro-
gramme positions from 0-
299 are reserved, for the
“HOTBIRD (EUTELSAT)
13° East” satellite pro-
grammes, programme
positions 300 to 799 are
reserved.