Kathrein UFS 702sw - Manual (Page 55)

55
Digital output
In the right-hand window you see the current signal status
at the digital output (= digital cinch socket).
Audio settings
If “PCM” is displayed, the digital signal is encoded in PCM
format. If “AC 3” is displayed, the audio signal is encoded in
Dolby Digital format.
If available, select the language or audio track you want
from the left-hand window by pressing the
% button and
press the button to confi rm your selection. The currently
selected audio track is highlighted in white.
The number of languages and audio tracks offered is
dictated by the programme provider.
A PCM-encoded language or audio track is always
displayed. You may, however, also be offered two or more
PCM-encoded languages or audio tracks with one or more
in AC3 format.
For radio programmes up to 20 PCM-encoded audio tracks
may be available, which you can select using the
% button
and confi rm by pressing the button.
“AC 3 – general”:
When you select “Dolby Digital/AC 3” mode for digital
audio, the digital output is automatically switched to AC 3
as soon as a relevant coding is transmitted (see “Signal
paths/digital audio”).