Kathrein UFS 702sw - Manual (Page 43)

43
Installation
TV > VCR (video return path)
ON When ON is selected, the video and audio signals
from the TV socket are still transmitted to the VCR
socket even in standby mode.
OFF Slightly less power is used in standby mode in the
OFF position.
VCR signal (input signal at VCR Scart socket)
CBVS/RGB Use the CBVS/RGB setting when
connecting a VHS video recorder or a DVD
player/recorder.
YC Use the YC setting when connecting an
S-VHS video recorder (S-Video).
Picture format
4:3 If 4:3 is set, all programmes are displayed in the
regular 4:3 format.
16:9 When 16:9 is set, all programmes broadcast in
widescreen format, and fl agged appropriately, are
automatically switched to 16:9 format.
However, this function only operates if your TV set
can process and display 16:9 format pictures (6 volt
switching voltage).
Digital audio
Two modes are available for the digital output of your
receiver:
Standard The signal at the digital output is encoded in
PCM format (“PCM”)
AC 3 If you have a Dolby Digital system, you can
select AC3/Dolby Digital mode.
If your receiver receives a Dolby Digital
encoded audio signal, the digital output is
automatically switched to Dolby Digital format
(AC-3).
In both modes, press button A at any time to display the
“Digital/analogue audio mode” menu to check the current
format of the digital output signal or make a different
selection, if necessary. Note:
VCR signals