Kathrein UFS 640si - Manual (Page 13)

13
FIRST INSTALLATION: General
Before using your receiver for the fi rst time, read the “Safety Instructions” and
“Connection and Setup” sections.
The “Connection examples” section provides a sample confi guration.
Do not connect the receiver to the power supply until all installation work has been
properly carried out.
The guidance given in the “First Installation” section assumes that the receiver has
been properly connected as per the “Safety Instructions” and “Connection and Set-
Up” sections.
First switch your TV set on and select the AV channel slot. Switch on your receiver at the power switch at the
front of the unit. The following display appears:
Also pay attention to the bars
at the bottom of the on-screen
display! These provide information
on what to do next.
Note: If you are unsure whether you chose the right option from a previous menu, you can go back a
step at any time during the fi rst installation process by pressing the
#
(red) button.
Select the menu language you want using the

buttons. Available options: German, English, French,
Italian, Spanish, Czech, Dutch and Turkish.
Press the
$
(green) button to move to the next menu.