Kathrein UFS 640si - Manual (Page 23)

23
FIRST INSTALLATION: single-cable system (manual)
Confi rm this display with the

button. Then press the
button. You will be asked whether you wish to save
the changes. Use the

buttons to select “Yes, save
changes” and confi rm by pressing the

button. Now
press the
$
(green) button.
The receiver will automatically display the menu for the channel search. Continue by selecting the item
(“Perform channel search”).
Test connection
When you have completed all the settings, press the

buttons to switch to the “Test connection”
selection fi eld and press the

button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to the single-cable
system, you will see the following display:
Check your settings (frequency and transmission channel) and if necessary call for expert help.
If no connection to the single-cable system could be established, the following display appears: