Kathrein UFS 640si - Manual (Page 37)

37
“PREVIEW” VIEW (PROGRAMME LISTINGS)
EPG - ELECTRONIC PROGRAMME GUIDE
Also pay attention to the
bars at the bottom of the on-
screen display! These provide
information on what to do next.
Pressing the

button displays the next programme (“Next” view); pressing the

button returns you to
the “Current” view.
If you wish to view the programme currently being shown on a channel, you need not exit the EPG,
just select the desired channel. At the top right of the screen you will see the current TV picture for the
selected channel.
In the “Coming up” view you will see all the programmes that will be shown in the previous “Current” list of
selected channels. Provided that EPG data has been supplied by the channel provider, the receiver displays
the programmes that will be shown on the selected channel for several days in advance.
You can use the cursor buttons (
@
) to select the desired programme and, if available, you can use the
!
button to open further information on the desired programme.
Using the

buttons you can scroll through the channels in their sequence in the overall channel list.
You remain however within the “EPG” view at all times.
The
'
button allows you to scroll backwards and forwards a day at a time.
Using the

(red dot) button you can load the selected programme into the recording settings (see
“Recording” section).
The “Coming up” view (programme listings) can be called up at any time in EPG by pressing the
%
(yellow)
button.