Kathrein UFS 640si - Manual (Page 7)

7
RECEIVER FEATURES / DELIVERY SCOPE
The UFS 640 is suitable for the reception of digital satellite TV and radio programmes.
The HDMI interface allows one to connect the receiver to the HDMI interface on a suitable fl at-screen TV for
optimal viewing comfort. An integrated upscaler ensures optimal picture processing for fl at-screen TVs.
The receiver is supplied with an external power supply unit which allows the user to operate it on both 230 V
and 12 V, as well as the accessories required for on-surface or under-shelf installation.
A variety of features include: Kathrein EPG, guided fi rst installation with national programme lists, electrical
audio output for Dolby Digital (AC 3), a video Cinch output and videotext with 800-page memory capacity.
The receiver is available in silver.
- UFS 640si
- Remote control RC 671
- Scart cable
- 2 batteries, AAA 1.5 V
- IR sensor
- 230 V/12 V power supply unit
- 12 V connection cable with shock-proof plug (cigarette lighter and 12 V connection plug)
- Mounting support
- User manual
- Safety notes
DELIVERY SCOPE
DISPLAY OF ANTENNA SIGNAL LEVEL AND EMISSION
OF SEARCH TONE (SAT FINDER) ON THE TV SET
Initial installation must fi rst be completed before you
can use the search tone to align the antenna.
Press the

-Taste to access the main menu and
press the
!
-button for three seconds to activate the
search tone. On the screen, you will then be able to
see the menu “antenna confi guration” where the bars
signal strength and signal quality are displayed. At the
same time, the receiver will display the current signal
strength (available at the receiver input).
The higher the tone, the better the signal strength.
Press the -Taste button to switch off the tone and exit the menu..