Lenovo 3980 - Manual (Page 52)

Diagnostic error code FRU/Action
000-026-XXX FLASH data error 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-027-XXX BIOS Configuration/Setup error 1. Run Setup
2. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
3. System board
000-034-XXX BIOS Buffer Allocation failure 1. Reboot the system
2. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
3. Run memory test
4. System board
000-035-XXX BIOS Reset Condition detected 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-036-XXX BIOS Register error 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-038-XXX BIOS Extension failure 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. Adapter card
3. System board
000-039-XXX BIOS DMI data error 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-195-XXX BIOS Test aborted by user Information only Re-start the test, if necessary
000-196-XXX BIOS test halt, error threshold exceeded 1. Press F3 to review the log file
2. Re-start the test to reset the log file
000-197-XXX BIOS test warning 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
000-198-XXX BIOS test aborted 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Flash the system and retest. See “Updating (flashing)
BIOS from a disc” on page 99
3. Go to “Undetermined problems” on page 64
000-199-XXX BIOS test failed, cause unknown 1. Go to “Undetermined problems” on page 64
2. Flash the system and re-test
3. Replace component under function test
46 Hardware Maintenance Manual