Liebert GXT2 - 3X1 - Manual (Page 34)

34 Chapter 1 Product Introduction
E1-20010230-C-1.0
(8) The equipment address setup can directly change the 3-bit digit which forms the
equipment's address, the equipment address range is 0~255.
(9) Frequency tracking range settings includes:
User can select according to the power supply frequency requirement of load.
3. Function of Keys
Key Function
〈 On/Silence〉 When the UPS is in off state, pressing this key
for 1 second switch on the inverter ; When the
UPS is in alarm mode , pressing this key for 1
second can silence the alarm ; When the UPS is
on with no alarm, pressing this key for 4 second
can start battery self testing.
〈 Off〉 When the UPS is on with no alarm, pressing this
key for 1 second will shutdown the inverter.
〈 Scroll 〉 Scroll between different menus of the same
level or complete the parameter selection .
〈 Enter〉 Used in opening the menu, confirm and return.
3. Menu Operation
See Appendix-Figure 1-2: Keypad Operation:
1% 2% 4% No change 6% 10%