Lexmark MENUS AND MESSAGES C524 - Manual (Page 27)

Menu Groups
27
Using printer menus
PDF Menu
Use these menu items to change printer settings that affect PDF jobs.
PostScript Menu
Use these menu items to change printer settings that affect jobs using the PostScript printer language.
Hex Trace Helps isolate the source of a print
job problem. Activate With Hex Trace selected, all data sent
to the printer is printed in hexadecimal
and character representation. Control
codes are not executed.
Note: To exit Hex Trace, turn the
printer off, or reset the printer:
1 Press .
2 Press
until Reset
printer appears, and then press
.
Coverage
Estimator Provides an estimate of the percent
coverage of cyan, magenta, yellow,
and black on a page. The estimate
is printed on a separator page. *Off Percent coverage is not printed.
On Prints the estimated percentage of
coverage for each color on the page.
LCD Contrast Adjusts the contrast of the operator
panel display. 1 - 10 (*5) A higher value makes the display
appear lighter; a lower value makes
the display appear darker.
Menu item Purpose Values
Scale to Fit Scales page content to fit the
selected media size. Yes
*No
Yes—Scales the page to fit the
selected media.
No—Does not scale the page; printed
text or graphics are cropped if larger
than the selected media.
Annotations Specifies whether to print
annotations in the PDF. *Do Not Print
Print
Do Not Print—Does not print PDF
annotations.
Print—Prints PDF annotations.
Menu item Purpose Values
Print PS Error Prints a page defining the PostScript
emulation error when an error
occurs. On Prints an error message before it
discards the job.
*Off Discards the print job without printing
an error message.
Font Priority Establishes the font search order.
Note: Font Priority is only displayed
when a formatted flash or hard disk
is installed, is neither defective nor
Read/Write or Write protected, and
Job Buffer Size is not set to 100%.
*Resident Printer searches printer memory for
the requested font before searching
the flash memory or hard disk.
Flash/Disk Printer searches the hard disk and
flash memory for the requested font
before searching printer memory.
Menu item Purpose Values