Lexmark MENUS AND MESSAGES C524 - Manual (Page 45)

Understanding printer messages
45
Understanding printer messages
Load <src> with <Custom Type Name> • Load the source with the correct type and size media.
• Cancel the current job.
Load <src> with <Custom String>
Load <src> with <size>
Load <src> with <type> <size>
Menus are Disabled The printer menus are disabled. The printer settings cannot be changed
from the operator panel.
Note: It is possible to cancel a job, print a confidential job, or print a held
job.
Contact your system support person.
Network A network interface is the active communication link.
Network <x>
No held jobs Wait for the message to clear.
No jobs found Note: The four-digit personal identification number (PIN) entered is not
associated with any confidential print job.
• Press
until Try again appears, and then press to enter
another PIN.
• Press until Cancel appears, and then press to exit the
Enter PIN screen.
No jobs to cancel Wait for the message to clear.
Parallel A parallel interface is the active communication link.
Parallel <x>
Power Saver • Send a job to print.
• Press
to warm the printer to normal operating temperature and
display the Ready message.
Printer locked, enter PIN to unlock The operator panel is locked.
Enter the correct PIN number to unlock it.
Printing Wait for the message to clear.
Programming Disk
DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Programming Flash
DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Programming System Code
DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear and the printer to reset.
Ready Send a job to print.
Remote Management Active
DO NOT POWER OFF The printer settings are being configured, and the printer was taken
offline to ensure it is not currently printing and processing jobs.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Message Action