Lexmark MENUS AND MESSAGES C524 - Manual (Page 44)

Understanding printer messages
44
Understanding printer messages
Disk corrupted The printer has attempted a disk recovery process, and cannot repair
the disk.
Reformat appears. Press to reformat the disk and delete all
files currently stored on the disk.
Disk Recovery x/5 yyy%
DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed.
The printer is attempting to recover the hard disk. Disk recovery takes
place in five phases; the operator panel displays the percent complete of
the current phase.
Wait for the message to clear.
Enabling Menus Wait for the message to clear.
Encrypting Disk yyy%
DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed.
The printer is encrypting the hard disk. The percent complete is
displayed.
Wait for the message to clear.
Enter PIN Enter the PIN specified in the driver when the confidential job was sent
to the printer.
Enter PIN to lock Enter the correct PIN number to lock the operator panel and prevent
menu changes.
Flushing buffer Wait for the message to clear.
Formatting Disk yyy%
DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed.
The printer is formatting the hard disk. The percent complete is
displayed.
Wait for the message to clear.
Formatting Flash
DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Insert Tray <x> Insert the specified tray.
Internal System Error
Reload Bookmarks • Reload the Bookmarks.
• Press
until Continue appears, and then press to clear
the message and continue printing.
Internal System Error, Reload
Security Certificates • Reload the Security Certificates.
• Press
until Continue appears, and then press to clear
the message and continue printing.
Invalid Network Code Download valid code to the MarkNet N8000 Series internal print server.
Note: Network code may be downloaded while this message is
displayed.
Invalid Engine Code Download valid engine code to the printer.
Note: Engine code may be downloaded while this message is displayed.
Invalid PIN Enter the correct PIN.
Load Manual feeder with
<Custom Type Name> • Load the specified media in the manual feed slot or multipurpose
feeder.
• Press until Continue appears, and then press to ignore
the manual feed request and print on media already installed in one of
the sources.
If the printer finds a tray that has media of the correct type and size, it
feeds media from that tray. If the printer cannot find a tray with the
correct media type and size, it prints on whatever media is installed in
the default source.
• Cancel the current job.
Load Manual feeder with
<Custom String>
Load Manual feeder with <size>
Load Manual feeder with
<size> <type>
Message Action