Lowrance electronic GlobalMap Baja 840C - Manual (Page 102)

94
Minimum or Maximum Tick controls how many tick marks will be dis-
played on the gauge. If you set the minimum tick to 1 and the max tick
to 10, there will be 10 tick marks between 0 and 10, 10 and 20 and so
on. In the case of a speedometer, that's one tick for one mile per hour. If
you change the minimum tick to 2 and leave the maximum tick at 10,
you'll have one tick for every two miles per hour. That's five ticks be-
tween 0 and 10, 10 and 20 and so on.
Tick Marks setup menu (left) with Thresholds Setup menu (right).
Thresholds setup can be used as a visual aid to mark portions of the
gauge. It is divided into Upper and Lower Thresholds, each containing
major (warning) and minor (caution) threshold settings. Two sets of
numbers must be entered for each threshold. Minor thresholds ranges
are colored yellow. Major threshold ranges are red.
Text setup allows you to choose where the text appears on the gauges.
Text can be above needle, below needle, right of needle and left of needle.
GlobalMap Baja Text Setup menu( left) with transparent gauge labeled
as "track"; Text Setup menu with destination house number entered in
units text position (right).
Default
The Default command restores the factory default settings. If you run
into trouble modifying any of the gauge settings, Default is there to bail
you out. The button is labeled
R ESTORE D EFAULTS
.