Lowrance electronic GlobalMap Baja 840C User Manual

Page 88

Advertising
background image

80

Trackline Extension window are two check boxes (Show Time and Show Dis-

tance) which allow you to turn on or off the time and/or distance settings.
To set trackline extension: From the Map Page, press

MENU

|

to

M

AP

D

ATA

|

ENT

. Press

to

T

RACKLINE

E

XTENSION

|

ENT.

Use

↑ ↓ to select the desired

distance setting and press

ENT.

Presentation Mode
From the Map Page, press

MENU

|

to

M

AP

D

ATA

|

ENT

. Press

and

→ to

P

RESENTATION

M

ODE

|

ENT.

Use

↑ ↓ to choose the desired depth and press

ENT

.

Presentation Mode gives you some control over the map layout by allow-

ing you to choose between US and International Modes.
Safety Contour
From the Map Page, press

MENU

|

to

M

AP

D

ATA

|

ENT

. Press

and

→ to

S

AFETY

C

ONTOUR

|

ENT.

Use

↑ ↓ to choose the desired depth and press

ENT

. The

S

AFETY

C

ONTOUR

command allows you to modify depth contours on a navionics

map for water less than 10 meters deep. Based on your preferences, the

depth contours will be colored or shaded to make it easier to identify shallow

areas. Keep in mind the size of your ship's keel when determining which

option is right for your vessel.
Map Overlays (Range Rings; Lat/Long Grid)

The map screen can be customized with four range rings and/or grids that

divide the plotter into equal segments of latitude and longitude.
Range rings are handy for visually estimating distances on the map. The ring

diameters are based on the current zoom range. For example: at the 100-mile

zoom, the screen will show two rings with your current position in the center.

The large ring touching the left and right sides of the screen is 100 miles in

diameter (same as the zoom range). The second smaller ring is 50 miles in di-

ameter (always 1/2 the zoom range).
The distance from your current position to the smaller ring (the ring's ra-

dius) is 25 miles (always 1/4 the zoom range). With the arrow keys and map

cursor, you can scroll the map to see the third and fourth rings. In this ex-

ample, the distance to the third ring is 75 miles and distance to the fourth

ring is 100 miles from your current position.
To set range rings: From the Map Page, press

MENU

|

to

M

AP

D

ATA

|

ENT

.

Press

to

R

ANGE

R

INGS

. With the option highlighted, press

ENT

to check it (turn

on) and uncheck it (turn off). After the option is set, press

EXIT

|

EXIT

to return

to the page display.
To set Lat/Long Grid: From the Map Page, press

MENU

|

to

M

AP

D

ATA

|

ENT

. Press

to

L

AT

/L

ON

G

RID

L

INES

. With the option highlighted,

press

ENT

to check it (turn on) and uncheck it (turn off). After the op-

tion is set, press

EXIT

|

EXIT

to return to the page display.

Advertising