Lowrance electronic GlobalMap Baja 840C - Manual (Page 80)

72
System Setup Menu with Communications Port highlighted (left) and
Communications Port menu (right).
For assistance in configuring the unit to communicate with another
device, consult the factory. Customer service phone numbers are in the
back of this manual. Also see the entry below for to Configure NMEA.
To set Com Port Configuration:
1. Press
MENU
|
MENU
| ↓ to
S
YSTEM
S
ETUP
|
ENT
.
2. Press ↓ to
C OMMUNICATIONS P ORT
|
ENT
.
Configure NMEA
You can configure the unit to use specific NMEA sentences.
1. Press
MENU
|
MENU
| ↓ to
S YSTEM S ETUP
|
ENT
.
2. Press ↓ to
C OMMUNICATIONS P ORT
|
ENT
| → to
C ONFIGURE NMEA
|
ENT
.
3. A menu appears showing the prefixes of the available NMEA sen-
tences. A check mark next to a prefix means the prefix is in use. Use ↑
↓ → ← to select a prefix. Press
ENT
to turn on or off the prefix.
4. When the desired prefixes are checked or unchecked, press
EXIT
|
EXIT
|
EXIT
|
EXIT
to return to the previous page.
Coordinate System Selection
The Coordinate System Menu lets you select the coordinate system to
use when displaying and entering position coordinates.