Lowrance electronic GlobalMap Baja 840C - Manual (Page 106)

98
To set the Day:
Press → to
D AY
|
ENT
. Press ↑ or ↓ to select the day, then
press
ENT
.
To set the Year:
Press → to
Y
EAR
|
ENT
. Press ↑ or ↓ to select the year,
then press
ENT
.
Time Settings Menu.
To Set Time Format
: Press ↓ to the Time Format window. Just highlight
the option you prefer — 12 or 24 hour — and press
ENT
.
To Set Date Format:
Press ↓ and → to modify the Date Format. There are
three options: Month/Day/Year, Day/Month/Year and Year/Month/Day.
Use
↑ or ↓ to select the format you prefer, then press
ENT
.
The last field we have to discuss is
C
ONFIG
DST
. This feature allows your
unit to automatically adjust Daylight Saving Time (you should only have
to set it once). You may select which set of rules matches DST in your
region, or simply accept the default. Use the
↓ key to configure DST.
Once you have each field set the way you want, press
EXIT
repeatedly
until you return to the previous page.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS re-
ceiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. If you want,
you have the option of turning off the WAAS Acquired/Lost alarm with-
out affecting how the unit uses WAAS. Here's how:
1. Press
MENU
|
MENU
| ↓ to
GPS S
ETUP
|
ENT
| ↓ to
S
HOW
WAAS A
LARM
.