Lowrance electronic GlobalMap Baja 840C - Manual (Page 62)

54
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT
to activate the selec-
tion box, use ↓ or ↑ to highlight the file, then press
ENT
to accept the
selection. Next, press ↓ to
L
OAD
D
ATA
|
ENT
. The unit will display a comple-
tion message when the data transfer is finished. To return to the Page
view, press
EXIT
repeatedly.
These figures show the menu sequence for loading a GPS Data File
from a MMC into the GlobalMap Baja's memory.
Save GPS Data to Hard Drive
If you do not have a MMC or SD card, you can save any GPS data
(trails, routes, waypoints and icons) to the unit's hard drive. To do this
from the Map Page:
1. Press
MENU| MENU|
↓ to
S
YSTEM
S
ETUP
2. Press → to
T RANSFER M Y D ATA
|
ENT| ENT
. A dialog box will appear on
screen. In this dialog box, you can choose whether to save the data to the
unit's hard drive or to a MMC card.
3. Press
↓ to
S
AVE
D
ATA
| Press
ENT
The data is now stored on the unit's hard drive.
Figure 3.
Figure 2. Figure 1.
Figure 4.