Mounting the unit: bracket – Lowrance electronic GlobalMap Baja 840C User Manual

Page 28

Advertising
background image

20

NOTE:

You do not need a Bus Adapter Cable with this unit if you use an
approved Devicenet NMEA 2000 connector. Approved Devicenet
NMEA 2000 connectors work with Lowrance red connector dis-
play units and components, so no adapter cables are needed.

Mounting the Unit: Bracket

You can install the GlobalMap Baja on the top of a dash with the sup-

plied gimbal bracket.
If you use the supplied bracket, you may be interested in the optional R-A-
M

®

bracket mounting system. This converts the unit's gimbal bracket to a

swivel mount, which can be used on the dash or overhead mounting posi-

tions. Installation instructions are supplied with the R-A-M mounting

kits. R-A-M offers permanent mounts and temporary mounts suitable for

many vehicle types. See your Eagle dealer or visit the LEI web site

(

www.lei-extras.com

) for the latest options; accessory ordering information

is on the inside back cover of this manual. For a complete look at the

many mounting options, visit the RAM web site at

www.ram-mount.com

.

Optional R-A-M mounting system.

Bracket Installation
Mount the in any convenient location, provided there is clearance behind

the unit when it's tilted for the best viewing angle. You should also make

sure there is enough room behind the unit to attach the power and GPS

antenna/receiver module cables (Drawings beginning on the next page

shows the dimensions of the gimbal-mounted.).
Holes in the bracket's base allow wood screw or through-bolt mounting.

You may need to place a piece of plywood on the backside of thin fiber-

glass panels to reinforce the panel and secure the mounting hardware.

Advertising