Lindy 32530 - Manual (Page 12)

22
Section 5
IP Access
Configuration
& Operation
Section 5 IP Access Configuration & Operation
23
5.0.1. KVM over IP Access Features
The IP access module provides remote KVM over IP access to the KVM switch U8/16. It
converts all keyboard video and mouse signals and sends them as TCP/IP signals over your
LAN/WAN connection. The KVM switch U8/16 may be accessed from any computer connected
to your network and provides full KVM access including BIOS level access to all the connected
computers.
Please note that KVM over IP does not operate in a “real time” environment and that some
degree of time delay will occur due to limiting factors such as available bandwidth and network
traffic.
The KVM over IP Access module can be accessed via a simple web browser and via dedicated
software tools included with the product. It uses secure encrypted sessions and password
authentication protocols.
Please note that the conversion of video, mouse and keyboard signals requires a certain
amount of CPU processing time. Transporting large amounts of data over TCP/IP requires a
high bandwidth connection. Limited bandwidth may restrict or limit the possible screen
resolutions and colour depths which can be transmitted over your LAN / WAN.
A connection which exhibits limited bandwidth will result in slower mouse reaction and cursor
control. Also the available screen resolution, colour depth and refresh rates will also be affected.
Ensure the connection you are using provides adequate bandwidth, some adjustment of screen
resolution, colour depth and mouse cursor control may have to be made for satisfactory
operation.
5.0.2 KVM over IP Access Module Installation
Before you install the IP Access module into the KVM switch ensure all connected computers
are switched off and the power supply is unplugged. Proceed to unscrew and remove the small
metal cover on rear of the KVM switch. Carefully slide the module into the slot and secure in
place with the screw previously removed.
You may now proceed to power up all connected equipment and check for correct operation.
For the remainder of this manual the U8/16 KVM switch with installed KVM
over IP Module will be referred to as U8/16-IP.