Lindy 32530 - Manual (Page 20)

Section 5 IP Access Configuration & Operation
38
Remote Console Status Line
Status line
Shows both console and the connection state. The size of the remote screen is displayed. The
example below was taken from a Remote Console with a resolution of 1024 x 768 pixels. The
value in brackets describes the connection to the Remote Console. Norm means a standard
connection without encryption, SSL indicates a secure connection.
Furthermore, both the incoming (In:) and the outgoing (Out:) network traffic are visible (in kb/s).
If compressed encoding is enabled, a value in brackets displays the compressed transfer rate.
For more information about Monitor Only and Exclusive Access settings, see the relevant
sections on page 35.
Section 5 IP Access Configuration & Operation
39
5.7. Menu Options
5.7.1. Remote Control
KVM Console
To open the KVM console, click either the menu entry on the left or on the console picture on
the right. To refresh the picture, click on the Refresh button.
Remote Power
Future firmware updates will allow the P16-IP to control external RS-232 controlled power
control distribution units. Please contact LINDY for further information regarding compatibility,
connection and configuration of both LINDY and third party power control distribution units.