Lindy 32530 User Manual
Page 24
Section 5 IP Access Configuration & Operation
46
7. You will see the dialog below detailing the active image:
8. Click Reactivate. Access the console window and you will see that another CD drive has
been installed on the host computer. This is the virtual drive you have just set up. You can
access the uploaded CD image as though it were a regular CD. Click Unset to remove the
image.
SAMBA
If you would like to access the share via SAMBA, SAMBA must be set up properly. You may
either edit the SAMBA configuration file /etc/samba/smb.conf, or use the Samba Web
Administration Tool (SWAT) or WebMin to set the correct parameters.
Section 5 IP Access Configuration & Operation
47
Drive Redirection
The Drive Redirection feature allows the host system to access the CD-Rom drives, hard drives,
floppy drives etc. on your client PC.
To use this feature you need the Drive Redirection Tool which is part of the KVM Vision Viewer
application included on the supplied CD.
1. To set up Drive Redirection, first install KVM Vision Viewer. After installation launch the
application: